Web Course Report 5

Save this page to your disk. 
Open the file with a word processing program.
Add in your answers with the word processing program.
Copy the entire file and paste it into an e-mail document
that you e-mail to jim-henry@utc.edu 


BE CLEAR AND SPECIFIC IN THESE POINTS.

   a. Describe which system you are working on

--describe the "input" and "output" functions (including units) 
--describe the system's steady-state operating curve (SSOC)
--describe the system's operating range that you have chosen
--identify what you have chosen for the system's Input Baseline
and Output Baseline (include units)
--describe the system's gain (K) in the operating range (include units)
--describe the system's time constant (tau) in the operating range (include units)
--describe the system's dead time (to) in the operating range (include units)

   b. Report the amount of time you have spent on the assignment.

   c. List the ID-code for the experiments you have run. 
      (These are the titles at the top of the screen window
       of your results pages.  
       The ID-code will look like this: 012345123PM  for example.)

   d. Describe the successes & problems you've encountered 
with the system and the concepts.

   e. Describe the data graphs you've seen 
and point out any features of the experimental results.


   f. Report your results in a report which describes your 
experiments and results.  Provide a table of results.  
The table includes order of system, corner frequency, 
ultimate frequency and critical gain, Kcu.


   g. Submit your Bode Plot to ftp://331@design.engr.utc.edu/  (No password)
      (Use your Netscape browser and choose the "File" menu
      and choose the "Upload File..." item.  Find the Excel file
      with the Bode plot and click "Open")





Version of 4 February 1998