Enter these Parameters for the Experiment:

Length of experiment (min):

Controller Tuning Parameters

Proportional-Integral controller gain, Kc (%/deg. C):

Controller integral time (TauI) (min):

Set-point Specifications

Initial set-point value (deg. C):

Change of set-point value (deg. C):

Time of change of set-point (min):

Enter this Configuration Information:	TEMPERATURE HELP

Control variable is Cold Water Outlet Hot Water Outlet temperature (deg.C)	Flow Directions are Counter-current Co-current	Hot Water Flow is in Tubes Shell
Cooling Water Valve Info	Cooling Water Valve Opening %	Valve cycle time (min) #1 -- open % of the cycle at the beginning of the cycle #2 -- open % of the cycle at the end of the cycle