Welcome to the Flow Controls System Equipment in the Lab!



Flow Control System

Flow System
Flow System reservoir (blue tank on left)
and Pump and motor (grey object on right)
White pipes are PVC
Flow System
Flow System Pipes
The inlet manifold is across the top
There is a solenoid valve on left with two manual valves to the right
The right-most manual valve is in the line that leads to the MicroMotion Coriolis Force mass flow meter
The flowmeter sends a 4-20 ma signal to the controller
Flow System
Flow System Pipes
The inlet pipe (White PVC) rises in the middle
To the right is the variable-voltage, variable frequency (VVVF) motor speed controller
To the left is the MicroMotion Coriolis Force mass flow meter
The top unit is the signal transmitter, the lower part is the flow sensing unit.

**** CONTINUOUS IMPROVEMENT ***


For suggestions and feedback,

contact Jim Henry - Jim-Henry@utc.edu... Send E-Mail to Lab-Master

Last updated 14 November 1997

Home Page of The University of Tennessee at Chattanooga